Our Protective Covers (Materials and Designs) are serving and proving themselves for our Armed Forces here in the US and Overseas in Saudi Arabia, Afghanistan,
Iraq and Elsewhere
We Can Prototype and Build to Exact Military, DOD, Armed Forces and Law Enforcement Specifications
We Use Patented Designs and Materials which are Proven / Guaranteed to Perform and Last
We are a Registered Member of the CCR
100% Made in the USA
May 17-19, 2011
We will be attending FPED 8, Force Protection Equipment Demonstration
Stafford Regional Airport, Stafford VA
The unclassified demonstration is NOT open to the public and is intended for attendees from DOD, Federal Departments and Agencies, and Federal, State and Local Law Enforcement and Corrections Agencies.
Foreign personnel must have a US sponsor to attend.
Sponsored by The Physical Security Equipment Action Group (PSEAG), Department of Defense (DOD), Department of Energy (DOE), Technical Support Working Group (TSWG)
_____________
Some of the Equipment and Materials we will be Debuting and Demonstrating:
New Lightweight Composite Materials for Protection in Extreme Environments and Conditions
Custom Fuel Tank, Engine Intake and Canopy Covers for the F-14, F-16-,
F-18 Fighter Jets
Personnel Face Masks for protection in extreme heat, wind and sand environments
M60 Machine Gun Covers / Turret Gun Mount Canopies
Surveillance Camera Covers
Heavy Armored Vehicle Kevlar Window Covers
_____________
703.327.9844
Military Protective Covers
Geza Gear Inc., is a registered member of the CCR, Central Contractor Registry, and has worked/continues to work with the Department of Defense (DOD) and other Government and State Agencies.
We are a custom builder and fabricator of Military Grade Protective Covers located in Northern VA, just outside Washington DC. We build to exact specifications for any equipment or personnel needs/requirements.
Because we have the ability to custom design our materials to suit exact needs and prototype designs for any military grade equipment, we can quickly and cost effectively fill small or large orders.
Everything, from our patented technical fabrics to the designing, modeling, fabrication, prototyping, cutting and sewing is performed by us. From start to finish, we will produce exactly what you are requiring.
If you have any questions, or if we can be of assistance, please feel free to contact us.
The photo to the right shows a BLUE "custom built" pylon cover after one season of harsh weather exposure. The BLACK cover on the left is the Geza G3 (patent pending) Pylon Cover. Superior
in every way, from design to materials and built to last and perform for countless trouble-free years. When protection counts, when budgets matter, the only way to build it is to
build it right the first time so you will never have to spend money on building it again!
______________________________________
The Geza Gear G3 External Fuel Tank Pylon Cover (Patent Pending) is engineered to perfectly fit all U.S. F-14, F-16 and F-18 Pylons. We also have patterns for the longer Pylon builds as required by the Dutch.
Built to Airforce Specifications, our materials are 100% anti-static, impervious to jet and diesel fuel, have high melt points etc. Contact us for a full specification list or let us know your exact requirements.
The Geza Gear G3 Pylon Cover is shown here in use at the 178th Fighter Wing protecting their entire fleet of Pylons and are being produced/prototyped for other military bases throughout the US and overseas.
These F-14, F16 and F-18 Fuel Tank Pylon Geza Covers (Patent Pending), offer full protection from all-weather conditions and rodents. Expensive and sensitive electrical hook-ups are kept clean
and protected from dirt, sand, debris and all moisture. Installation and removal is a one man operation in under 30 seconds, allowing the Pylon to quickly be installed to the Fuel Tank and bolted underneath
the Fighter Plane with zero down time and cleaning.
______________________________________
Geza IP (Intense Pressure) Kevlar Window Covers
will be available for use on MAV (Mobile Armored Vehicles) such as the Golan and Protector.
These F-14, F16 and F-18 Fuel Tank Pylon Geza Covers (Patent Pending), offer full protection from all-weather conditions and rodents. Expensive and sensitive electrical hook-ups are kept clean
and protected from dirt, sand, debris and all moisture. Installation and removal is a one man operation in under 30 seconds, allowing the Pylon to quickly be installed to the Fuel Tank and bolted underneath
the Fighter Plane with zero down time and cleaning.
